Automotive Mechatronics and Intelligent Vehicles (with thesis)
Master	TR-NQF-HE: Level 7	QF-EHEA: Second Cycle	EQF-LLL: Level 7

General course introduction information

Course Code:

EEE525

Course Name:

Advanced Power Electronics

Course Semester:

Spring

Course Credits:

Theoretical	Practical	Credit	ECTS
3	0	3	10

Language of instruction:

Course Requisites:

Does the Course Require Work Experience?:

Type of course:

Department Elective

Course Level:

Master

TR-NQF-HE:7. Master`s Degree

QF-EHEA:Second Cycle

EQF-LLL:7. Master`s Degree

Mode of Delivery:

Face to face

Course Coordinator :

Assoc. Prof. ÖMER CİHAN KIVANÇ

Course Lecturer(s):

Assoc. Prof. ÖMER CİHAN KIVANÇ

Course Assistants:

Course Objective and Content

Course Objectives:

To Gain Design Ability of Power Electronics Circuits

Course Content:

Basic Principles and Methods of Power Electronics Circuit Design / Design Examples; Boost Type Switching Power Supply, DC Motor Control with a Controlled Rectifier and PWM Controlled Inverter / Determination and Classification of the Desired Properties of the Circuits / Design of Power, Control and Protection Circuits / Detailed Analysis and Simulation of Circuit and Components / Selection of Components and Assembling the Circuit / Obtaining Experimental Results and Commenting of the Results

Learning Outcomes

The students who have succeeded in this course;

Learning Outcomes

1 - Knowledge
Theoretical - Conceptual
2 - Skills
Cognitive - Practical
1) The Students will be able to identify, formulate, and solve electrical engineering problems
3 - Competences
Communication and Social Competence
Learning Competence
Field Specific Competence
1) The Students will be able to use modern engineering tools and techniques
2) The Students will be able to ability to design a desired electrical engineering circuit, system or process
Competence to Work Independently and Take Responsibility

Lesson Plan

Week	Subject	Related Preparation
1)	Basic Principles and Methods of Power Electronics Circuit Design	Course Notes
2)	AC-DC Converters	Course Notes
3)	Determination and Classification of the Desired Properties for a DC Motor Control with AC-DC Converter.	Course Notes
4)	Design of Power, Control and Protection Circuits	Course Notes
5)	Detailed Analysis and Simulation of Circuit and Components	Course Notes
6)	DC-DC Converters ( Buck, Boost, Buck-Boost)	Course Notes
7)	Design of Power, Control and Protection Circuits	Course Notes
8)	AC-AC Converters	Course Notes
9)	Design of Power, Control and Protection Circuits	Course Notes
10)	Detailed Analysis and Simulation of Circuit and Components	Course Notes
11)	DC-AC Converters	Course Notes
12)	Determination and Classification of the Desired Properties for an Motor Control with DC-AC Converter.	Course Notes
13)	Power Electronics Based on DSP	Course Notes
14)	Power Electronics Based on DSP	Course Notes

Sources

Course Notes / Textbooks:	Lecture Notes
References:	Lecture Notes

Course-Program Learning Outcome Relationship

Learning Outcomes	1	3	2
Program Outcomes
1) Sufficient knowledge in mathematics, science and engineering related to their branches; and the ability to apply theoretical and practical knowledge in these areas to model and solve engineering problems.
2) The ability to identify, formulate, and solve complex engineering problems; selecting and applying appropriate analysis and modeling methods for this purpose.
3) The ability to design a complex system, process, device or product under realistic constraints and conditions to meet specific requirements; the ability to apply modern design methods for this purpose. (Realistic constraints and conditions include such issues as economy, environmental issues, sustainability, manufacturability, ethics, health, safety, social and political issues, according to the nature of design.)
4) Ability to develop, select and use modern techniques and tools necessary for engineering applications; ability to use information technologies effectively.
5) Ability to design experiments, conduct experiments, collect data, analyze and interpret results to examine engineering problems or discipline-specific research topics.
6) The ability to work effectively in disciplinary and multidisciplinary teams; individual work skill.
7) Effective communication skills in Turkish oral and written communication; at least one foreign language knowledge; ability to write effective reports and understand written reports, to prepare design and production reports, to make effective presentations, to give and receive clear and understandable instructions.
8) Awareness of the need for lifelong learning; access to knowledge, ability to follow developments in science and technology, and constant self-renewal.
9) Conform to ethical principles, and standards of professional and ethical responsibility; be informed about the standards used in engineering applications.
10) Awareness of applications in business, such as project management, risk management and change management; awareness of entrepreneurship, and innovation; information about sustainable development.
11) Information about the universal and social health, environmental and safety effects of engineering applications and the ways in which contemporary problems are reflected in the engineering field; awareness of the legal consequences of engineering solutions.
12) Knowledge on advanced calculus, including differential equations applicable to automotive engineering; familiarity with statistics and linear algebra; knowledge on chemistry, calculus-based physics, dynamics, structural mechanics, structure and properties of materials, fluid dynamics, heat transfer, manufacturing processes, electronics and control, design of vehicle elements, vehicle dynamics, vehicle power train systems, automotive related regulations and vehicle validation/verification tests; ability to integrate and apply this knowledge to solve multidisciplinary automotive problems; ability to apply theoretical, experimental and simulation methods and, computer aided design techniques in the field of automotive engineering; ability to work in the field of vehicle design and manufacturing.

Course - Learning Outcome Relationship

No Effect	1 Lowest	2 Low	3 Average	4 High	5 Highest

	Program Outcomes	Level of Contribution
1)	Sufficient knowledge in mathematics, science and engineering related to their branches; and the ability to apply theoretical and practical knowledge in these areas to model and solve engineering problems.
2)	The ability to identify, formulate, and solve complex engineering problems; selecting and applying appropriate analysis and modeling methods for this purpose.
3)	The ability to design a complex system, process, device or product under realistic constraints and conditions to meet specific requirements; the ability to apply modern design methods for this purpose. (Realistic constraints and conditions include such issues as economy, environmental issues, sustainability, manufacturability, ethics, health, safety, social and political issues, according to the nature of design.)
4)	Ability to develop, select and use modern techniques and tools necessary for engineering applications; ability to use information technologies effectively.
5)	Ability to design experiments, conduct experiments, collect data, analyze and interpret results to examine engineering problems or discipline-specific research topics.
6)	The ability to work effectively in disciplinary and multidisciplinary teams; individual work skill.
7)	Effective communication skills in Turkish oral and written communication; at least one foreign language knowledge; ability to write effective reports and understand written reports, to prepare design and production reports, to make effective presentations, to give and receive clear and understandable instructions.
8)	Awareness of the need for lifelong learning; access to knowledge, ability to follow developments in science and technology, and constant self-renewal.
9)	Conform to ethical principles, and standards of professional and ethical responsibility; be informed about the standards used in engineering applications.
10)	Awareness of applications in business, such as project management, risk management and change management; awareness of entrepreneurship, and innovation; information about sustainable development.
11)	Information about the universal and social health, environmental and safety effects of engineering applications and the ways in which contemporary problems are reflected in the engineering field; awareness of the legal consequences of engineering solutions.
12)	Knowledge on advanced calculus, including differential equations applicable to automotive engineering; familiarity with statistics and linear algebra; knowledge on chemistry, calculus-based physics, dynamics, structural mechanics, structure and properties of materials, fluid dynamics, heat transfer, manufacturing processes, electronics and control, design of vehicle elements, vehicle dynamics, vehicle power train systems, automotive related regulations and vehicle validation/verification tests; ability to integrate and apply this knowledge to solve multidisciplinary automotive problems; ability to apply theoretical, experimental and simulation methods and, computer aided design techniques in the field of automotive engineering; ability to work in the field of vehicle design and manufacturing.

Learning Activity and Teaching Methods

Lesson
Lab
Project preparation

Assessment & Grading Methods and Criteria

Written Exam (Open-ended questions, multiple choice, true-false, matching, fill in the blanks, sequencing)
Application

Assessment & Grading

Semester Requirements	Number of Activities	Level of Contribution
Project	1	% 50
Final	1	% 50
total		% 100
PERCENTAGE OF SEMESTER WORK		% 50
PERCENTAGE OF FINAL WORK		% 50
total		% 100

Workload and ECTS Credit Grading

Activities	Number of Activities	Duration (Hours)	Workload
Course Hours	14	3	42
Presentations / Seminar	1	12	12
Project	1	175	175
Paper Submission	1	24	24
Final	1	48	48
Total Workload			301